Acoustical Treatment

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

CONTACT | LOGIN

12315 Robin Blvd.
Houston, Texas 77045, USA
(713) 433-6701 or
Toll Free: (800) 444-1252

icc@spray-on.com


CERTIFICATIONS

ISO 9001:2008
ISO 9001:2008

UL Listed


Celbar Skunk

SonaSpray "fc" Acoustic Finish Specifications

PART 1 – GENERAL

1.01 Section Includes

  1. Sprayed cellulose finish system.

1.02 Related Items

  1. Clips, hangers, supports, sleeves and other attachments to spray bases are to be placed by other trades prior to the application of sprayed insulation.
  2. Ducts, piping, conduit or other suspended equipment shall not be positioned until after the application of sprayed insulation.

1.03 Submittals

  1. Copy of manufacturer’s ISO 9001:2008 Certification.
  2. Submit 2 copies of test reports indicating compliance with the following:
    1. Minimum light reflectivity:
      1. Arctic White: 81+
      2. White: 73+
    2. NRC values per ASTM C-423 conducted by a NVLAP certified testing laboratory:
    3. SonaSpray “fc” on Solid Backing

      Inches

      125 HZ

      250 HZ

      500 HZ

      1000 HZ

      2000 HZ

      4000 HZ

      NRC

      0.50”

      .00

      .14

      .49

      .87

      1.00

      .99

      .65

      1.00”

      .05

      .40

      .94

      1.04

      .97

      .99

      .85

      SonaSpray “fc” on Ribbed Metal Deck

      Inches

      125 HZ

      250 HZ

      500 HZ

      1000 HZ

      2000 HZ

      4000 HZ

      NRC

      0.75”

      .17

      .58

      .91

      .89

      .87

      .84

      .80

    4. Flame Spread Index: 5 ASTM E-84/UL 723
    5. Smoke Developed: 5 ASTM E-84/UL 723
    6. Bond Strength
      SonaSpray “fc” >600 psf ASTM E-736
      SonaSpray “fc” Dura-K >900 psf ASTM E-736
    7. Compression Strength
      SonaSpray “fc” >400 psf ASTM E-761
      SonaSpray “fc” Dura-K >600 psf ASTM E-761
    8. Comply with IBC 803.3/2009 IBC 803.10 stability requirements for interior finishes.
  3. Manufacturer’s written certification that product contains no asbestos, fiberglass or other man-made mineral fibers.

Quality Assurance

  1. Manufacturer must have a current listing with ICC.
  2. Manufacturer must be in compliance with the 2006 IBC.
  3. Manufacturer must be ISO 9001:2008 Certified.
  4. Applicator: Licensed by manufacturer.
  5. Manufacturer must subscribe to independent laboratory follow-up inspection services of Underwriters Laboratories. Each bag shall be labeled accordingly.
  6. Mock-up: Apply a 100 square foot representative sample to be reviewed by the Architects and/or Owner prior to proceeding.

1.05 Delivery, Storage and Handling

  1. Deliver in original, unopened containers bearing name of manufacturer, product identification and reference to U.L. testing.
  2. Store materials dry, off ground and under cover.
  3. Protect liquid adhesive from freezing.

PART 2 – PRODUCTS

2.01 Acceptable Manufacturers

  1. International Cellulose Corporation
    12315 Robin Boulevard
    Houston, Texas 77045
    (713) 433-6701 or (800) 444-1252
    FAX: (713) 433-2029
  2. For approved applicators contact ICC at (800) 444-1252

2.02 Materials (Specify desired product)

  1. SonaSpray “fc” Acoustical Finish (4:1 Adhesive Ratio)
  2. SonaSpray “fc” Dura-K (3:1 Adhesive Ratio)
  3. Color shall be _________________________.

PART 3 – EXECUTION

3.01 Examination

  1. Examine surfaces and report unsatisfactory conditions in writing. Do not proceed until unsatisfactory conditions are corrected.
  2. Verify surfaces to receive spray insulation to determine if priming/sealing is required to ensure bonding and/or to prevent discoloration caused by migratory stains.

3.02 Preparation

  1. Provide masking, drop cloths or other satisfactory coverings for materials/surfaces that are not to receive insulation to protect from over-spray.
  2. Coordinate installation of the sprayed cellulose fiber with work of other trades.
  3. Prime surfaces as required by manufacturer’s instructions or as determined by examination.

3.03 Installation

  1. Average thickness to achieve NRC of 0.65 or greater.
  2. Install spray applied acoustical finish according to manufacturer’s recommendations.
  3. Cure material with continuous natural or mechanical ventilation.
  4. Remove and dispose of over spray.

3.04 Protection

  1. Protect finished installation under provisions of Division 1.